- 7.0’’ TFT display
- 1024x600px resolution
- High brightness 800cd/m2
- Full viewing angle (IPS)
- MIPI DSI interface
- Metal mounting frame
- Industrial projected capacitive touch screen
- Black decorative cover glass
|1 - 9||0% $86.78|
|10 - 99||2.13% $84.93|
|100 - 349||3.408% $83.82|
|350 - 499||4.68% $82.72|
|500 - 999||5.958% $81.61|
|1000 - 2999||7.18% $80.55|
|3000 +||8.511% $79.39|
Optical bonding is a process of affixing the touch panel (or just the protective glass) to the display using a liquid adhesive, gel or dry (film). In general, this process improves the parameters of the module – the optical performance, as well as durability.
The air-gap is the reason for the phenomena of reflection of sunlight. So, when the display is off, the Visual Area (V.A) is never black – it is gray.
When removing the air gaps, we reduce the number of internal reflecting surfaces, which increase of optical performance. This phenomenon improves readability, by reducing the reflection and correct contrast.
The high brightness, IPS TFT displays have a typical surface luminance of up to 1000 cd/m2 which means they are very bright even outdoors. The full viewing angles allow the user to interact with the display in a natural and intuitive way from every side. The high resolution provides crisp and clear colors.
The PCAP (Projected Capacity touch panel) is classified as ‘industrial’ (as opposed to ‘consumer’) when it is able to operate correctly in more demanding, harsh conditions (i.e. disturbing electromagnetic fields around causing interferences with panel controller, water droplets present in the surrounding area also on panel glass), and react properly when touched by hands in gloves. It can be tuned at the factory, detect touch through thicker glass layers than consumer panels (6mm thick glass layer was tested with success in the Riverdi lab) and it uses an industrial grade chip controller. Such controllers have industrial manufacturer’s guidelines implemented and are guaranteed to be manufactured typically from 10 to 15 years without any changes.
To keep the proper sensitivity the touch controller is tuned to the glass thickness.
For more information please see this page.
aTouch was designed to provide the functionality of a modern Projected Capacitive Touch panel in a traditional shape and size perfect for an upgrade of a device. Thanks to the absolute flat design and multi-touch feature, it will significantly raise the value of any project. It features chemically strengthened glass, which has increased durability, thanks to the process of ion-exchange. They are easy to assemble, easy to clean and easy to implement into your design.
Newly built devices most often use the uxTouch panel which is stuck to the outside of the device and is slightly larger than the display – it looks nice and modern. However, in the devices that only need an upgrade, the panel often needs to be the same size as the display. Thus, there are many customers who require the solution provided by aTouch in order to mount the display from the inside into the classic hole.
You can customize LVDS / RGB / MIPI displays in many different ways.
As you can see the possibilities are endless. All you need to do is choose.
We will help you to get the perfect tailor-made product.
|Dimensions||181.6 × 100.6 × 8.68 mm|
Projected Capacitive Touch Panel
|Touch Screen Bonding Technology|
|Active area (mm)|
|Operating temp. (°C)|
|Dot pitch (mm2)|
RGB Vertical Stripe