STM32 Embedded Display – 5-inch TFT LCD screen – RVT50HQSFWN00


The power supply cable RVA-0106M-1.25FF-1 and ST-LINK/V2 &ST-LINK V2-ISO SWD programming cable RVA-SWD-06M-C100 V2  are included as free accessories for single package.

Main features:

  • 5’’ TFT display
  • 800x480px resolution
  • High brightness 1000cd/m2
  • Full viewing angles (IPS)
  • STM32U5A9NJH6Q in Mass Production
  • All STM32U5 interfaces
  • High quality
  • 4MB Flash
  • 2.5MB RAM
  • TouchGFX direct support
  • Power Supply: 6V-48V

Touch Screen Bonding Technology

Touch Screen Shape

Mounting Frame
With Frame

Part Number: SM-RVT50HQSFWN00 Category:


High performance

The STM32U5 series offers advanced power-saving microcontrollers, based on Arm® Cortex®-M33 to meet the most demanding power/performance requirements for smart applications, including wearables, HMI, personal medical devices, home automation, and industrial sensors.

Offering up to 4 Mbytes of flash memory (dual bank) memory and 2514 Kbytes of SRAM, the STM32U5 series of microcontrollers takes performance to the next level with advanced graphics capabilities.

The STM32U5 series provides greater integration and memory capabilities to maximize performance. Ultra-low power, it is the first 32-bit MCU embedding a flash memory, up to 4 Mbytes.


Expansion connector

The board offers additional and independent GPIOs over a 40pin, 1.27mm female socket. It provides direct access to the below GPIOs of MCU, that makes it possible to be easily extended by an addon board for specific application.
List of interfaces on Expansion connector:
2 x I2C, UART, USART, SPI, USB, 7 x PWMs, 1 x DAC (Digital-to-analog), 2 x ADCs (Analog-to-digital)

Fully independent CAN FD

Applicable in industrial and automotive area.


Can be configured to both Host and Device.

Micro-SD card slot

Another external storage. Supporting uSD card type: SD, SDHC, SDXC cards.

Fast-programming SWD port

SWD connector allows to program STM32 and QSPI with customer’s applications. Riverdi developed the ST-LINK programming cable that is included in the STM32 Embedded Display sample package (single packing).


In some applications there might be a need to connect a second display in one device. With the STM32 Embedded Display line it is very easy as these displays are equipped with Master RiBUS connector – universal interface to Riverdi’s intelligent displays. In this way, the second display does nots need an external host controller and 2 independent displays can be controlled by one STM32.

Display unboxing

Have a look what you will get when you will order a sample of STM32 Embedded Display 5.0″.

TouchGFX support

Example demo board support package- “Smart home” is available in TouchGFX designer.

TouchGFX Webinar
TouchGFX Workshop

Wide input supply range

Power supply voltage ranges from 7.0 V- 48.0V. A wide power supply comes with a wide range of application. Reverse polarity protection which ensures the device is not damaged if the power supply polarity is reversed. The module also can be powered from interface connectors: RS485, CAN FD. They are internally connected.

Low EMI design

STM32 Embedded boards were designed with special attention paid to electromagnetic compatibility, a design that has given them a high immunity to external electromagnetic signals which otherwise could have disturbing influence on their working correctly.

Board is equipped with low noise backlight converters thanks to which they produce low electromagnetic interference (EMI) to the surrounding space. In consequence, external electronic devices or circuits do not need special electromagnetic screening.

The EMC measurements held in a specialized laboratory confirmed low electromagnetic emissions of STM32 Embedded modules, even when displaying dynamic pictures.

High brightness, IPS TFT

Typical surface luminance for a high brightness, IPS TFT displays is 1000 cd/m2 which means it is very bright even outdoors. The full viewing angles allow the user to interact with the display in a natural and intuitive way from every side. Please see the datasheet for more features.

Customized STM32 embedded displays

You can customize STM32 embedded displays in many different ways. 

  • Change the color, shape, and size of the cover glass
  • Have your logo printed on the cover glass (or any other graphics you might need)
  • Add a different interface
  • Enhance the brightness of the screen
  • Change the thickness of the cover lens for the CTP
  • Choose a different viewing angle of the display
  • Change the pinout
  • Request different gasket assembly

As you can see the possibilities are endless. All you need to do is choose.

We will help you to get the perfect tailor-made product.

Additional information

Weight120 g
Dimensions137.50 × 76.60 × 10.81 mm
Size (inch.)

Touch Screen

Touch Screen Bonding Technology

Mounting Frame

LCD type

, , ,

Viewing direction

Active area (mm)

Dot pitch (mm2)

Pixel Arrangement


Brightness (cd/m²)

Graphics controller

Input Voltage (V)

Surface Treatment

Operating temp. (°C)

Go to Top