Main features:

  • 7.0’’ TFT display
  • 1024x600px resolution
  • High brightness 800cd/m2
  • Full viewing angle (IPS)
  • RGB interface
  • Metal mounting frame

Description

Optical / Air Bonding

Enhancing the optical performance of your display

Optical bonding is a process of affixing the touch panel (or just the protective glass) to the display using a liquid adhesive, gel or dry (film). In general, this process improves the parameters of the module – the optical performance, as well as durability.

The air-gap is the reason for the phenomena of reflection of sunlight. So, when the display is off, the Visual Area (V.A) is never black – it is gray.

When removing the air gaps, we reduce the number of internal reflecting surfaces, which increase of optical performance. This phenomenon improves readability, by reducing the reflection and correct contrast.

High brightness, IPS TFT

Typical surface luminance for a high brightness, IPS TFT displays is 800 up to 1000 cd/m² which means it is very bright even outdoors. The full viewing angles allow the user to interact with the display in a natural and intuitive way from every side. Please see the datasheet for more features.

Industrial Touch Screen

Reacts to the slightest touch

The PCAP (Projected Capacity touch panel) is classified as ‘industrial’ (as opposed to ‘consumer’) when it is able to operate correctly in more demanding, harsh conditions (i.e. disturbing electromagnetic fields around causing interferences with panel controller, water droplets present in the surrounding area also on panel glass), and react properly when touched by hands in gloves. It can be tuned at the factory, detect touch through thicker glass layers than consumer panels (6mm thick glass layer was tested with success in the Riverdi lab) and it uses an industrial grade chip controller. Such controllers have industrial manufacturer’s guidelines implemented and are guaranteed to be manufactured typically from 10 to 15 years without any changes.

Main features:

  • ILITEK Touch IC- ILI2511, with 10 years guaranteed availability
  • USB/I²C interface/Optional UART
  • Supports cover glass thickness up to 15mm
  • Supports double gloves operation – not only nitrile –even double thicker gloves
  • Working with water on the surface
  • Multi-touch, up to 5 fingers
  • Great EMC, RS (radiated susceptibility) and CS (conductive susceptibility) performance
  • Touch performance could be easily tuned to fit specific needs

 

For more information please see this page.

Traditional shape with modern functionality

aTouch was designed to provide the functionality of a modern Projected Capacitive Touch panel in a traditional shape and size perfect for an upgrade of an older device. Thanks to the absolute flat design and multi-touch feature, it will significantly raise the value of any project. It features chemically strengthened glass, which has increased durability, thanks to the process of ion-exchange. They are easy to assemble, easy to clean and easy to implement into your design.

Newly built devices most often use the uxTouch panel which is stuck to the outside of the device and is slightly larger than the display – it looks nice and modern. However, in older devices that only need an upgrade, the panel needs to be the same size as the display. Thus, there are many customers who require the solution provided by aTouch in order to mount the display from the inside into the classic hole.

Glass in displays comes from TFT factories in large sheets called mother glass and is sorted by classes. These classes are governed by ISO standards which identify three levels of allowable number of bad pixels.

Apart from the visual discomfort bad pixels cause, there are very important practical disadvantages to working on a screen missing a seemingly tiny dot. The importance will vary across industries but it is perhaps best illustrated in medical devices where even a single bad pixel may change image enough to lead to wrong conclusions and dramatic consequences.

In our 10.1” displays we add an additional layer of tests as standard so we do not miss a single item with a bad pixel. There is a 100% ZERO bad pixels guarantee.

Customized displays

You can customize displays in many different ways.

  • Change the color, shape, and size of the cover glass
  • Have your logo printed on the cover glass (or any other graphics you might need)
  • Add a different interface
  • Enhance the brightness of the screen
  • Change the thickness of the cover lens for the CTP
  • Choose a different viewing angle of the display
  • Change the pinout
  • Request different gasket assembly

 

As you can see the possibilities are endless. All you need to do is choose.

We will help you to get the perfect tailor-made product.

Additional information

Weight244 g
Dimensions181.6 × 100.6 × 8.68 mm
Size (inch.)

7.0"

Touch Screen

Projected Capacitive Touch Panel

Touch Screen Bonding Technology

Air Bonding

Interfaces

RGB

Mounting Frame

With Frame

Resolution

1024×600

Brightness (cd/m²)

800

Viewing direction

Full Angle

Active area (mm)

154.21×85.92

Operating temp. (°C)

-20~70

Dot pitch (mm²)

0.1506×0.1432

LCD type

IPS, Normally black, TFT, Transmissive

Backlight Type

27 LEDs

Pixel Arrangement

RGB Vertical Stripe

Driver IC

EK79001HK+EK73215BCGA, ILI2132A

Surface Treatment

Anti-glare

Do you need something else?

Contact us now
, ,

RVT70HSTFWCA0


Product variants

Touch Screen Bonding Technology

850 cd/m2

The process of affixing the touch panel to the display using a liquid adhesive. It improves the parameters of the module - the optical performance, as well as durability.

Optical Bonding

850 cd/m2

The process of affixing the touch panel to the display using a liquid adhesive. It improves the parameters of the module - the optical performance, as well as durability.

800 cd/m2

The air-gap is the reason for the phenomena of reflection of sunlight. So, when the display is off, the Visual Area (V.A) is never black - it is gray.

Air Bonding

800 cd/m2

The air-gap is the reason for the phenomena of reflection of sunlight. So, when the display is off, the Visual Area (V.A) is never black - it is gray.

Touch Screen Shape

uxTouch

Most newly built devices use the uxTouch panel. It is slightly larger than the display and is stuck to the outside of the device. This gives a sleek and modern feel.

uxTouch

uxTouch

Most newly built devices use the uxTouch panel. It is slightly larger than the display and is stuck to the outside of the device. This gives a sleek and modern feel.

aTouch

It has all the same advantages of modern technology as uxTouch but without the decorative aspect. The display is mounted from the inside of the device and into the classic hole.

aTouch

aTouch

It has all the same advantages of modern technology as uxTouch but without the decorative aspect. The display is mounted from the inside of the device and into the classic hole.


$79.22 unit price

$79.22


Part Number: SM-RVT70HSTFWCA0

Tag: aTouch, IPS, RGB