$130.25
The power supply cable RVA-0106M-1.25FF-1 and ST-LINK/V2 &ST-LINK V2-ISO SWD programming cable RVA-SWD-06M-C100 V2 are included as free accessories for single package.
Main features:
The STM32U5 series offers advanced power-saving microcontrollers, based on Arm® Cortex®-M33 to meet the most demanding power/performance requirements for smart applications, including wearables, HMI, personal medical devices, home automation, and industrial sensors.
Offering up to 4 Mbytes of flash memory (dual bank) memory and 2514 Kbytes of SRAM, the STM32U5 series of microcontrollers takes performance to the next level with advanced graphics capabilities.
The STM32U5 series provides greater integration and memory capabilities to maximize performance. Ultra-low power, it is the first 32-bit MCU embedding a flash memory, up to 4 Mbytes.
RS485
Expansion connector
The board offers additional and independent GPIOs over a 40pin, 1.27mm female socket. It provides direct access to the below GPIOs of MCU, that makes it possible to be easily extended by an addon board for specific application.
List of interfaces on Expansion connector:
2 x I2C, UART, USART, SPI, USB, 7 x PWMs, 1 x DAC (Digital-to-analog), 2 x ADCs (Analog-to-digital)
Fully independent CAN FD
Applicable in industrial and automotive area.
USB
Can be configured to both Host and Device.
Micro-SD card slot
Another external storage. Supporting uSD card type: SD, SDHC, SDXC cards.
Fast-programming SWD port
SWD connector allows to program STM32 and QSPI with customer’s applications. Riverdi developed the ST-LINK programming cable that is included in the STM32 Embedded Display sample package (single packing).
RiBUS
In some applications there might be a need to connect a second display in one device. With the STM32 Embedded Display line it is very easy as these displays are equipped with Master RiBUS connector – universal interface to Riverdi’s intelligent displays. In this way, the second display does nots need an external host controller and 2 independent displays can be controlled by one STM32.
Have a look what you will get when you will order a sample of STM32 Embedded Display 5.0″.
Example demo board support package- “Smart home” is available in TouchGFX designer.
Power supply voltage ranges from 7.0 V- 48.0V. A wide power supply comes with a wide range of application. Reverse polarity protection which ensures the device is not damaged if the power supply polarity is reversed. The module also can be powered from interface connectors: RS485, CAN FD. They are internally connected.
STM32 Embedded boards were designed with special attention paid to electromagnetic compatibility, a design that has given them a high immunity to external electromagnetic signals which otherwise could have disturbing influence on their working correctly.
Board is equipped with low noise backlight converters thanks to which they produce low electromagnetic interference (EMI) to the surrounding space. In consequence, external electronic devices or circuits do not need special electromagnetic screening.
The EMC measurements held in a specialized laboratory confirmed low electromagnetic emissions of STM32 Embedded modules, even when displaying dynamic pictures.
Typical surface luminance for a high brightness, IPS TFT displays is 850 cd/m2 which means it is very bright even outdoors. The full viewing angles allow the user to interact with the display in a natural and intuitive way from every side. Please see the datasheet for more features.
Optical bonding is a process of affixing the touch panel (or just the protective glass) to the display using a liquid adhesive, gel or dry (film). In general, this process improves the parameters of the module – the optical performance, as well as durability.
The air-gap is the reason for the phenomena of reflection of sunlight. So, when the display is off, the Visual Area (V.A) is never black – it is gray.
When removing the air gaps, we reduce the number of internal reflecting surfaces, which increase of optical performance. This phenomenon improves readability, by reducing the reflection and correct contrast.
The PCAP (Projected Capacity touch panel) is classified as ‘industrial’ (as opposed to ‘consumer’) when it is able to operate correctly in more demanding, harsh conditions (i.e. disturbing electromagnetic fields around causing interferences with panel controller, water droplets present in the surrounding area also on panel glass), and react properly when touched by hands in gloves. It can be tuned at the factory, detect touch through thicker glass layers than consumer panels (6mm thick glass layer was tested with success in the Riverdi lab) and it uses an industrial grade chip controller. Such controllers have industrial manufacturer’s guidelines implemented and are guaranteed to be manufactured typically from 10 to 15 years without any changes.
Main features:
For more information please see this page.
A uxTouch display is a specially designed LCD TFT display which has a Projected Capacitive Touch (PTC). They are the perfect choice for your project if you intend to have an interactive design and technology, thanks to their absolute flat design and multi-touch feature.
As you can see they feature a modern and sleek design without any holes in the housing.
On the technical side, they are a great option for industrial spaces, since there is no dirt accumulation possible. They also feature chemically strengthened glass, which has increased durability, thanks to the process of ion-exchange. They are easy to assemble, easy to clean and easy to implement into your design.
You can customize STM32 embedded displays in many different ways.
As you can see the possibilities are endless. All you need to do is choose.
We will help you to get the perfect tailor-made product.
| Weight | 146 g |
|---|---|
| Dimensions | 136 × 92.8 × 12.05 mm |
| Size (inch.) | |
| Touch Screen | |
| Touch Screen Bonding Technology | |
| Touch Screen Shape | |
| Mounting Frame | |
| LCD type | |
| Viewing direction | |
| Active area (mm) | |
| Dot pitch (mm2) | |
| Pixel Arrangement | |
| Resolution | |
| Brightness (cd/m²) | |
| Graphics controller | |
| Input Voltage (V) | |
| Driver IC | |
| Surface Treatment | |
| Operating temp. (°C) |
