1. Home
  2. Docs
  3. Datasheets
  4. EVE 1/2
  5. EVE2 5″

EVE2 5″

This datasheet gives detailed information about the Riverdi 5″ EVE2 displays. The displays come in different versions: with capacitive, resistive, or no touchscreen, with a decorative cover glass, as well as with our without a metal mounting frame.

Order now

Rev.1.0
2019-06-07

ITEM CONTENTS UNIT
LCD Type TFT/Transmissive/Normally white /
Size 5.0 Inch
Viewing Direction 12:00 (without image inversion) O’ Clock
Gray Scale Inversion Direction 6:00 O’ Clock
Number of Dots 800 x (RGB) × 480 /
Driver IC FT81x /
Interface Type SPI/QSPI /
Brightness no touch module 600 cd/m2
CTP module 510
RTP module 480
Color Depth 262k /
Pixel Arrangement RGB Vertical Stripe /
Surface Treatment Anti-glare / Clear (for CTP) /
Input Voltage 3.3 V

Note 1: RoHS, REACH SVHC compliant

Note 2: LCM weight tolerance: ± 5%.

1. Module classification information

RV T 50 x Q F x W x 0x
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
1. BRAND RV – Riverdi
2. PRODUCT TYPE T – TFT Standard
3. DISPLAY SIZE 50 – 5.0”
4. MODEL SERIAL NO. x (A-Z)
5. RESOLUTION Q– 800×480 px
6. INTERFACE F– TFT+controller FT8xx
7. FRAME N – No Frame

F – Mounting Frame

8. BACKLIGHT TYPE W – LED White
9. TOUCH PANEL N – No Touch Panel

R – Resistive Touch Panel

C – Capacitive Touch Panel

10. VERSION 0x (00-99)

2. Assembly guide – integration

Three options of rear side adhesive tape are available: double side adhesive tape 0.2 mm with 3M 467MP glue, foam double side adhesive tape 0.5 mm with DST 3M 9495LE glue or without any tape.

There are also two versions of glass color: black and white.

Rear side adhesive tape options:

Double side adhesive tape with DST 3M 9495LE glue (total thickness 0.2mm) Foam double side adhesive tape with 3M 9495LE glue (total thickness 0.5mm) Without tape

 

Cover glass color options:

BLACK WHITE

Product options:

PART NUMBER DESCRIPTION
RVT50UQFNWC00 FT813, uxTouch, black cover glass, 0.2mm DST
RVT50UQFNWC01 FT813, uxTouch, black cover glass, 0.5 mm DST
RVT50UQFNWC02 FT813, uxTouch, black cover glass, no DST
RVT50UQFNWC03 FT813, uxTouch, white cover glass, 0.2mm DST
RVT50UQFNWC04 FT813, uxTouch, white cover glass, 0.5 mm DST
RVT50UQFNWC05 FT813, uxTouch, white cover glass, no DST

2.1. UxTouch assembly

UxTouch are LCD TFT displays with specially designed projected capacitive touch panels. UxTouch display can be mounted without any holed in the housing. Our standard UxTouch displays include double-sided adhesive tape (DST) to stick TFT easily to the housing. Basic series include 4.3”, 5.0” and 7.0” display sizes.

UxTouch models with double-side adhesive tape (PN with endings 00, 01, 03, 04) can be mounted by connecting the glass to the housing. Riverdi recommends to use support brackets assembled to display’s back. An additional support will stiffen the whole structure and minimize the influence of external factors such as vibration. Figure 1 and Figure 2 below show examples of using support elements.

Figure 1. Example of using support brackets

2.2. Mounting frame

For dimensions 3.5”, 4.3”, 5.0” and 7.0” the product with mounting frame version is available. Thanks to the four catches attached to the side, frame provides strong assembly to the surface by mounting element (like the screw, see Figure 3). The frames are specially designed to fit Riverdi products perfectly. The diameter of the mounting hole is 3.5mm.

Figure 2. Mounting frame

3. Drawings

4. Absolute maximum ratings

PARAMETER SYMBOL MIN MAX UNIT
Supply Voltage for Logic VDD -0.3 4.0 V
Input Voltage for Logic VIN VSS-0.5 VDD+0.3 V
LED forward current IF 60 mA
Operating Temperature TOP -20 70 °C
Storage Temperature TST -30 80 °C
Humidity RH 90% (Max 60°C) RH

5. Electrical characteristics

PARAMETER SYMBOL MIN TYP MAX UNIT NOTES
Supply Voltage For Module VDD 3.0 3.3 3.6 V
Input Voltage For LED inverter BLVDD 2.8 3.3 5.5 V
LED Backlight Current IDDbacklight 290 363 mA BLVDD=3.3V
LED Backlight Current IDDbacklight 180 225 mA BLVDD=5V
Input Voltage ‘H’ level Vih 0.8VDD VDD V
Input Voltage ‘L’ level Vil -0.3 0.2VDD V
Voltage for LED backlight Vi 17.4 18.3 19.6 V
Current for LEd backlight Il 30 40 50 mA
Power consumption Wbl 522 732 980 mW
LED Life Time 30000 50000 Hrs Note1

6. Electro-optical characteristics

ITEM SYMBOL CONDITION MIN TYP MAX UNIT REMARK NOTE
Response Time Tr+Tf
θ=0°
∅=0°
Ta=25
20 ms Figure 4 4
Contrast Ratio Cr 500 Figure 5 1
Luminance Uniformity δ WHITE 75 80 % Figure 5 3
Surface Luminance
TFT
Lv
540 600
cd/m2
Figure 5
2
TFT+CTP 500 540
TFT+RTP 450 500
Viewing Angle Range
θ
∅ = 90° 40 50 deg Figure
6
∅ = 270° 60 70 deg Figure 6
∅ = 0° 60 70 deg Figure
∅ = 180° 60 70 deg Figure 6
CIE (x, y)
Chromaticity
Red
x
θ=0°
∅=0°
Ta=25
0.540 0.590 0.640
Figure 5
5
y 0.300 0.350 0.400
Green
x 0.298 0.348 0.398
y 0.520 0.570 0.620
Blue
x 0.095 0.145 0.195
y 0.060 0.110 0.160
White
x 0.270 0.320 0.370
y 0.310 0.360 0.410

Note 1. Contrast Ratio(CR) is defined mathematically as below, for more information see  Figure 4.

Note 2. Surface luminance is the LCD surface from the surface with all pixels displaying white. For more information, see Figure 4 .

Note 3. The uniformity in surface luminance δ WHITE is determined by measuring luminance at each test position 1 through 5, and then dividing the maximum luminance of 5 points luminance by minimum luminance of 5 points luminance. For more information, see Figure 4 .

Note 4. Response time is the time required for the display to transition from white to black (Rise Time, Tr) and from black to white (Decay Time, Tf). For additional information see FIG 1. The test equipment is Autronic-Melchers’s ConoScope series.

Note 5. CIE (x, y) chromaticity, the x, y value is determined by measuring luminance at each test position 1 through 5, and then make average value.

Note 6. Viewing angle is the angle at which the contrast ratio is greater than 2. For TFT module the contrast ratio is greater than 10. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see Figure 4.

Note 7. For viewing angle and response time testing, the testing data is based on Autronic-Melchers’s ConoScope series. Instruments for Contrast Ratio, Surface Luminance, Luminance Uniformity, CIE the test data is based on TOPCON’s BM-5 photo detector.

Note 8. For TFT module, Gray scale reverse occurs in the direction of panel viewing angle.

Figure 3. The definition of response time

Figure 4. Measuring method for Contrast ratio, surface luminance, Luminance uniformity, CIE (x, y) chromaticity

Figure 5.The definition of viewing angle

7. Interface description

PIN NO. SYMBOL DESCRIPTION
1 VDD Power Supply
2 GND Ground
3 SPI_SCLK SPI SCK Signal, Internally 47k Pull UP
4 MISO/ IO1 SPI MISO Signal / SPI Quad mode: SPI data line 1
5 MOSI/ IO0 SPI MOSI Signal / SPI Quad mode: SPI data line 0
6 CS SPI Chip Select Signal , Internally 47k Pull UP
7 INT Interrupt Signal, Active Low, Internally 47k Pull UP
8 PD Power Down Signal, Active Low, Internally 47k Pull UP
9 NC Not Connected
10 AUDIO_OUT Audio Out Signal
11 GPIO0/IO2 SPI Single mode: General purpose IO0/ SPI Quad mode: SPI data line 2
12 GPIO1/IO3 SPI Single mode: General purpose IO1/  SPI Quad mode: SPI data line 3
13 GPIO2 General purpose IO2
14 GPIO3 General purpose IO3 or analog input for ADC
15 NC Not Connected
16 NC Not Connected
17 BLVDD Backlight Power Supply, Can Be Connected to VDD
18 BLVDD Backlight Power Supply, Can Be Connected to VDD
19 BLGND Backlight Ground, Internally connected to GND
20 BLGND Backlight Ground, Internally connected to GND

8. FT81x Controller specifications

FT81x or EVE (Embedded Video Engine) simplifies the system architecture for advanced human machine interfaces (HMIs) by providing functionality for display, audio, and touch as well as an object-oriented architecture approach that extends from display creation to the rendering of the graphics.

8.1. Serial host interface

Figure 6. SPI interface connection

Figure 7. SPI interface connection

SPI Interface – the SPI slave interface operates up to 30MHz.

Only SPI mode 0 is supported. The SPI interface is selected by default (MODE pin is internally pulled low by 47k resistor).

QSPI Interface – the QSPI slave interface operates up to 30MHz. Only SPI mode 0 is supported. The QSPI can be configured as a SPI slave in SINGLE, DUAL or QUAD data bus modes.

By default the SPI slave operates in the SINGLE channel mode with MOSI as input from the master and MISO as output to the master. DUAL and QUAD channel modes can be configured through the SPI slave itself. To change the channel modes, write to register REG_SPI_WIDTH.

8.2. Block diagram

Figure 8. FT812 Block diagram

8.3. Host Interface SPI mode 0

Figure 9. SPI timing diagram

For more information about FT812 controller please go to official FT81x website.

http://www.ftdichip.com/Products/ICs/FT81X.html

8.4. Backlight driver block diagram

Backlight enable signal is internally connected to FT81x Backlight control pin. This pin is controlled by two FT81x’s registers.  One of them specifies the PWM output frequency, second one specifies the duty cycle. Refer to FT81x datasheet for more information.

Figure 10. Backlight driver block diagram

9. LCD timing characteristics

9.1. Clock and data input time diagram

Figure 11. Horizontal input timing diagram

Figure 12. Vertical input timing diagram

9.2. Parallel RGB input timing table

PARAMETER SYMBOL MIN TYP MAX UNIT
Horizontal Display Area Thd 800 DCLK
DCLK Frequency Fclk 30 50 MHz
One Horizontal Line Th 889 928 1143 DCLK
HS pulse width Thpw 1 48 255 DCLK
HS Blanking Thb 88 DCLK
HS Front Porch Thfp 1 40 255 DCLK
Vertical Display Area Tvd 480 TH
VS period time Tv 513 525 767 TH
VS pulse width Tvpw 3 3 255 TH
VS Blanking Tvb 32 TH
VS Front Porch Tvfp 1 13 255 TH

10. Touch screen panel specifications

10.1. Electrical characteristics

10.1.1. For capacitive touch panel

DESCRIPTION SPECIFICATION
Operating Voltage DC 2.8~3.3V
Power Consumption (IDD) Active Mode 10~18mA
Sleep Mode 30~50μA
Interface I2C
Linearity <1.5%
Controller FT5446
I2C address 0x38 (7-bit address)
Resolution 1280*768

10.1.2. For resistive touch panel

ITEM VALUE UNIT REMARK
Min. Typ. Max.
Linearity -1.5 1.5 % Analog X and Y directions
Terminal Resistance 350 1000 X
100 450 Y
Insulation Resistance MΩ DC 25V
Voltage 10 V DC
Chattering 10 ms 100kΩ pull-up
Transparency 80 % JIS K7105

Note: Avoid operating with hard or sharp material such as a ball point pen or a mechanical pencil except a polyacetal pen (tip R0.8mm or less) or a finger

10.2. Mechanical characteristics

10.2.1 for capacitive touch panel

DESCRIPTION INL SPECIFICATION REMARK
Touch Panel Size 4.3 inch  
Outline Dimension (OD) 120.3mm x 75.4mm Cover Lens Outline
Outline Dimension (OD) – UxTouch 136.0mm x 92.8mm Cover Lens Outline
Product Thickness 1.7mm  
Glass Thickness 0.7mm  
Ink View Area 97.0mm x 55.5mm  
Sensor Active Area 97.4mm x 56.4mm  
Input Method 5 Finger  
Activation Force Touch  
Surface Hardness ≥7H  

10.2.2. For resistive touch panel

ITEM VALUE UNIT REMARK
Min. Typ. Max.
Activation Force 80 gf Note 1
Durability-Surface Scratching Write 100,000 characters Note 2
Durability-Surface Pitting 1,000,000 touches Note 3
Surface Hardness 3 H JIS K5400

Note 1: Force test condition, Input DC 5V on X direction, Drop off Polyacetal Stylus (R0.8), until output voltage stabilize, then get the R8.0mm Silicon rubber and do finger Activation force test. Next step, 9 points.

Note 2: Measurement surface area conditions, Scratch 100,000 times straight line on the film with a stylus change every 20,000 times with Force: 250gf, Speed: 60mm/sec by R0.8 polaceteal stylus.

Note 3: Pitting test, Pit 1, 000, 000 times on the film with R0.8 silicon rubber with Force: 250gf and Speed: 2 times/sec.

11. Inspection

Standard acceptance/rejection criteria for TFT module.

11.1. Inspection condition

Ambient conditions:

  •       Temperature: 25±°C
  •       Humidity: (60±10) %RH
  •       Illumination: Single fluorescent lamp non-directive (300 to 700 lux)

Viewing distance:

35±5cm between inspector bare eye and LCD.

Viewing Angle:

U/D: 45°/45°, L/R 45°/45°

11.2 Inspection standard

Item Criterion
Black spots, white spots, light leakage, Foreign Particle (round Type)

*Spots density: 10 mm

Size < 5”
Average Diameter Qualified Qty
D < 0.2 mm Ignored
0.2 mm < D < 0.3 mm 3
0.3 mm < D < 0.5 mm 2
0.5 mm < D 0
Size >= 5”
Average Diameter Qualified Qty
D<0.2 mm Ignored
0.2 mm < D < 0.3 mm 4
0.3 mm < D < 0.5 mm 2
0.5 mm < D 0
LCD black spots, white spots, light leakage (line Type)

*Spots density: 10 mm

Size < 5”
Length Width Qualified Qty
W< 0.02 Ignored
L < 3.0 0.02 < W <0.05 2
L < 2.5 0.05 < W <0.08
0.08 < W 0
Size >= 5”
Length Width Qualified Qty
W< 0.02 Ignored
L < 3.0 0.02 < W <0.05 4
L < 2.5 0.05 < W <0.08
0.08 < W 0
Item Criterion
Clear spots
Size < 5”
Average Diameter Qualified Qty
D < 0.2 mm Ignored
0.2 mm < D < 0.3 mm 3
0.3 mm < D < 0.5 mm 2
0.5 mm < D 0
Size >= 5”
Average Diameter Qualified Qty
D<0.2 mm Ignored
0.2 mm < D < 0.3 mm 4
0.3 mm < D < 0.5 mm 2
0.5 mm < D 0

*Spots density: 10 mm

Polarizer bubbles
Size < 5”
Average Diameter Qualified Qty
D < 0.2 mm Ignored
0.2 mm < D < 0.5 mm 3
0.5 mm < D < 1 mm 2
1 mm < D 0
Total Q’ty 3
Size >= 5”
Average Diameter Qualified Qty
D<0.25 mm Ignored
0.25 mm < D < 0.5 mm 3
0.5 mm < D 0
Electrical Dot Defect
Size < 5”
item Qualified Qty
Black do defect 4
Bright dot defect 2
Total Dot 5
Size >= 5”
item Qualified Qty
Black do defect 5
Bright dot defect 2
Total Dot 5
Item Criterion
Touch panel spot
Size < 5”
Average Diameter Qualified Qty
D < 0.2 mm Ignored
0.2 mm < D < 0.4 mm 5
0.4 mm < D < 0.5 mm 2
0.5 mm < D 0
Size >= 5”
Average Diameter Qualified Qty
D<0.25 mm Ignored
0.25 mm < D < 0.5 mm 4
0.5 mm < D 0
Touch panel White Line Scratch
Size < 5”
Length Width Qualified Qty
W< 0.02 Ignored
L < 3.0 0.02 < W <0.05 2
L < 2.5 0.05 < W <0.08
0.08 < W 0
Size >= 5”
Length Width Qualified Qty
W< 0.03 Ignored
L < 5.0 0.03 < W <0.05 2
0.05 < W 0

12. Reliability test

NO. TEST ITEM TEST CONDITION
1 High Temperature Storage 80±2°C/240hours
2 Low Temperature Storage -30±2°C/240hours
3 High Temperature Operating 70±2°C/240hours
4 Low Temperature Operating -20±2°C/240hours
 

5

Temperature Cycle -30±2°C~25~80±2°C × 20 cycles

(30min.) (5min.)    (30min.)

6 Damp Proof Test 60°C ±5°C × 90%RH/240hours
7 Vibration Test Frequency 10Hz~55Hz

Amplitude of vibration : 1.5mm

Sweep: 10Hz~55Hz~10Hz, 12min

X, Y, Z 2 hours for each direction.

8 Package Drop Test Height:60 cm

1 corner, 3 edges, 6 surfaces

9 ESD Test Air: ±4KV 150pF/330Ω 5 times

Contact: ±2KV 150pF/330Ω 5 time

Note 1: Without water condensation.

Note 2: The function test shall be conducted after 2 hours storage at the room temperature and humidity after removed from the test chamber.

Was this article helpful to you? Yes No

How can we help?

Leave A Comment